● Inspection installation of tray and cable ladder. ● Inspection of grounding system. ● Inspection installation of lighting system. ● Inspection installation of F&G system. ● Inspection installation of Electrical dan instrumentation cable system including testing of cables. ● Inspection installation of MV/LV switchgear, UPS, electrical Panel, Marshaling cabinet and battery. ● Conduct detailed inspections of electrical, instrumentation & F&G installations to verify compliance with applicable codes, regulations, and safety standards. ● Document findings and prepare comprehensive inspection reports, outlining compliance status and recommendations for corrective actions.

● Review and comment on ITP’s, Project Procedures and Technical Specifications as and when required. ● Witness and control Quality aspects of Electrical, Instrumentation, Telecommunication construction and installation activities to ensure that they and are consistent with project specifications, procedures and relevant international codes and standards. ● Performs routine surveillance of assigned areas and disciplines to ensure compliance with applicable codes, standards, specifications and drawings. ● Closely monitors surveillance activities of subordinates to ensure compliance to agreed plan. ● Review daily RFI has and allocate amongst subordinates as appropriate. ● Regular and timely response to contractor raised RFI’s to witness and verify technical inspections as required by ITP’s and AFC Drawings. ● Regularly attend QA/QC Weekly Meeting with contractor and contribute to resolution of quality issues that occurred within a week. ● Closely cooperate with PMT Construction/HSE departments in order to ensure work is being performed in a safe manner and within stipulated time by promoting pro-active approach. ● Establishes and supports proactive and collaborative working relationships with EPC contractor. ● Monitor and report fabrication, installation, testing, and commissioning of field instruments, control systems, and associated infrastructure. ● Witness instrument loop checks, functionality testing, and integration with Distributed Control Systems (DCS), Programmable Logic Controllers (PLC), and Safety Instrumented Systems (SIS). ● Inspect and verify installation of telecom systems such as Public Address & General Alarm (PAGA), Fiber Optic Cable (FOC) networks, CCTV, and communication systems. ● Perform Electrical Inspection surveys for Battery banks, Uninterruptible power supply System (UPS), Generators, Motors, MOV, Substations, Switch racks, Transformers, Cable tray system, Conduit system, Enclosures, Junction boxes, Grounding system, lightning protection systems and Lighting system. ● Perform Electrical Inspection for Ex Equipment. ● Ensure all activities are undertaken in compliance with Company Safety, Health and Environment and Quality policies, regulations and standards.

● Checking and witness receiving material/equipment. ● Checking and review the vendor documents, datasheet, calibration certificate and Ex/Hazardous certificate for instrument and electrical. ● To carry out work in compliance with company values and policies, relevant laws, and regulations, agreed company priorities and objectives, company standards and procedures and good industry practices. ● To ensure the technical rooms fabrication and equipment installation as per Approved for Construction (AFC) project drawings, specifications, procedures and site instructions. ● To ensure the field equipment installation as per Approved for Construction (AFC) project drawings and according to hazardous area classification (ex: RFID tags and All Ex- equipment). ● Attend all necessary inspections as identified in the approved Inspection and Test Plan (ITP). ● Inspection and witnessing Verification and fabrication, construction and installation of electrical and instrument work perform by contractors/subcontractors in order to confirm that the applicable rule, code and standard are being meet and that the project requirements on the design drawing/specification. ● Raising & Reporting Non-conformance and ensure approved corrective actions implemented accordingly. ● Facilitate communication of civil related project execution issues the Project Team. Communicate with contractor to ensure that the work is executed in accordance with project specifications, company standards, and regulatory requirements. ● Identify and assess deviations to contract technical specifications and regulatory requirements; ensure that such deviations will be processed according to project procedures; maintain Deviation Control Log. ● Keep project team informed of E, I & T progress, deviations, and execution concerns. Provide input on contractor performance such as worker capabilities, training, qualifications, and staffing levels. ● Witness Hi-pot test of MV/HV cables. ● Final inspection of transformers, Switchgears, MCCs and other equipment’s. ● Inspection of Telecom & security system, such: inspection & testing of FO cable, inspection and testing Ethernet cable, inspection of telecom cabinet, inspection of CCTV system, inspection of telephone system, inspection of PAGA system, inspection perimeter intrusion detection system (PIDS), inspection server telecom system, inspection of access control equipment. ● Perform Cathodic Protection Inspection Survey for Rectifiers, Anode Junction boxes, Tanks, Vessel, Pipelines. ● Support & assist during commissioning phase.

● Attends Kick-Off Meetings (KOM) and Pre-Inspection (PIM) on behalf of company with contractor and vendor for equipment and materials with (High and Medium Criticality) and selected bulk commodities. ● Attend & witness during FAT for Electrical/Instrumentation/Telecom equipment. ● Ensures Contractor compliance with the stated deliverables of the PO and company specifications. ● Reviews Vendors and Contractors Inspection and Test Plan input for correctness and coordinates company engineering input. ● Coordinates company attendance as per approved vendor or sub vendor Inspection & Test Plans. ● Reviews contractor and company inspection surveillance reports for completeness and follows-up on any anomalies or deficiencies reported. ● Monitors and verifies contractor and vendor deficiency controls for control of nonconforming product. ● Reviews Vendor preservation procedures, preservation Inspection and Test Plan activities including requirements for shipping and packing. ● Monitors the Vendor Inspection process including identification of Carry Over Work (COW) and Punch lists items.

Job function: ● Ensure the installation of electrical & instrument (E&I) and Telecom equipment are meeting the project specification quality requirements and/or vendor recommendations. ● Interfacing with other disciplines from receipt of the E, I&T items through calibration and installation to final pre-commissioning/commissioning activities. ● Maintain daily log of activities. Responsibility and duties: ● Oversee and monitor inspection of E, I & T activities conducted at contractor’s/sub contractor’s facilities and in the field. ● Inspection of Electrical & Instrumentation and Telecom installation at hazardous area. ● Participate in receiving inspection of E, I & T items at site and monitor the preservation program for the same until hand over. ● Witness instrument calibration at contractor facilities and/or in the field for permanent project material and temporary test instruments/equipment used in E&I construction work. ● Co-ordinate with contractor and construction on cable tray routing and installation inspection. ● Ensure cable pulling and termination using proper crimping tools are done as per approved cable schedules and project specification. ● To ensure the field equipment installation as per Approved for Construction (AFC) project drawings and according to hazardous area classification (ex: RFID tags and All Exequipment). ● Witness installation inspection of E&I control panel (both local and inside the control room). ● Witness Hi-pot test of cables. ● Monitor preservation activities of switch gears, transformers, bus ducts and other equipment. ● Inspect installation of Bus duct. ● Monitor cable jointing/termination process to ensure manufacturer’s recommendations are followed. ● Inspect cable glanding, termination, dressing. ● Witness IR test of bus bar. ● Final inspection of transformers, Switchgears, MCCs and other equipment’s. ● Witness earth resistance test of individual electrodes and earthing network. ● Inspect location of each lighting fixtures, socket out lets, junction boxes with respect to type/application. ● Monitor and witness continuity and meggering inspection work for cables. ● Monitor cable laying work in trenches, through ducts and cable trays. ● Witness loop checks and review records for the same. ● Inspect installation and testing of instrument tubing works. ● Interface, participate or co-ordinate in E&I pre-commissioning activities as required. ● Preparation of punch list. ● Inspection of Telecom & security system, such: inspection & testing of FO cable, inspection and testing Ethernet cable, inspection of telecom cabinet, inspection of CCTV system, inspection of telephone system, inspection of PAGA system, inspection perimeter intrusion detection system (PIDS), inspection server telecom system, inspection of access control equipment. ● Perform Cathodic Protection Inspection Survey for Rectifiers, Anode Junction boxes, Tanks, Vessel, Pipelines. ● Support & assist during commissioning phase.

● Perform Electrical & Instrumentation Construction activities, ensuring technical requirements (e.g. project specifications, data sheets) fully comply with project deliverables and standardized processes and to provide Functional Safety design support. ● Demonstrated abilities in performing material receiving inspection, handling storage, preservation and ensuring compliance to the requirements. ● Leveraged skills in reviewing & approving EPC Contractor’s inspection & test plan, work procedures and method statements. ● Instrumental in reviewing & approving Contractor’s / Supplier’s Documents i.e. o Purchase Orders (PO), Inspection Test Plans, Inspection Assignment Packages, Quality Procedures, Work Instructions, Method Statements & Inspection Reports. ● Accountable for witnessing Calibration, Installation, Loop Checking & Functional Tests of Pressure, Flow, Temperature, Level instruments, Analyzers, Control / On-Off Valves, Fire & Gas Instruments. ● Oversaw the installation & testing of Electrical / Pneumatic Hook-Ups. ● Cable Routing, Laying, Segregation, Sealing, Termination & Grounding Insulation Resistance & Continuity tests. ● Installation inspection of impulse tube, airline pneumatic air header as per hook-up and AFC Drawing & Inspection of pressure testing /leak test of all pneumatic lines, impulse lines. ● Steered efforts in reviewing Mechanical Completion Dossiers, As-built drawings and Instrument Loop test Packages. ● Efficiently issued Non-Conformance & Site Inspection Reports for non-compliance activities against the approved quality procedures, inspection test plans, codes & standards and closed out on satisfactory corrective / preventive actions. ● Inspection of Electrical & Instrumentation at hazardous area. ● Support & assist during commissioning phase.

Job function: ● Perform Electrical, instrumentation & Telecom Construction activities for this Project. ● Ensuring technical requirements (e.g. project specifications, data sheets) fully comply with project deliverables and standardized processes. ● To provide Functional Safety design support with full integration into existing facilities. Job description: ● Oversaw the installation & testing of Electrical / Pneumatic Hook-Ups: Cable Routing, Laying, Segregation, Sealing, Termination & Grounding Insulation Resistance & Continuity tests, OTDR Tests (FOC) Implementing Factory Acceptance Tests (FAT), Site Installation Tests (SIT), Site Acceptance Tests (SAT) and approving check sheet of various components of Integrated Process Control & Safety Systems. ● ESD, UPS, Fire & Gas, HVAC, Analyzer and Communication system cabinets & consoles. ● Efficiently issued Non-Conformance & Site Inspection Reports for non-compliance activities against the approved quality procedures, inspection test plans, codes & standards and closed out on satisfactory corrective / preventive actions. ● Checking and review the vendor documents (datasheet, calibration certificate and ATEX certificate) for instrument and electrical. ● Steered efforts in reviewing Mechanical Completion Dossiers, As-built drawings and Instrument Loop test Packages. ● Holds the credit of representing the company in final walkthrough, Generation of Punch lists, expedite timely close out as per A, B and C categories. ● Doing Mechanical completion activity. ● Support and assist during commissioning activity. ● Inspection of Electrical & Instrumentation installation at hazardous area. ● Inspection of Telecom system, such: telephone system, radar system, CCTV system, PAGA system.

Projects: ● 10.000 DWT,12.000 DWT & 15.OOO DWT DECK CARGO SHIP COAL CARRIER-Self Propeller Barge-finished (BV Class). ● New project: AHTS (60 m), AH017, Owned by PT. Pelangi- Under progress (ABS Class). ● New project: 50m Crane pontoon Quito Tarakan 1, AH18, owner by Altus SingaporeUnder Progress (GL Class). ● New project: 112.5m DP2 PSV-EUREKA 1, owned by Gesmar CH-SA -Under Design (ABS Class). ● New Project: 112.5m Teraoka Transloader-Aldebaran, owned by United Tractor (BV Class). Job description: ● Perform calculation Electrical Load analysis for new project. ● Do design Electrical Single Line Diagram for new project. ● Do design Lighting Arrangement Plan for new project. ● Liaise permanently with class and flag authority about electrical system and follow-up all rules and regulation issues in order to achieve ship certification/registration. ● To review engineering drawings, data sheets, technical requisition and specifications. ● Confirm engineering contractor's is compliance to the company's requirements on electrical system. ● To attend and witness Factory Acceptance Test (FAT) on all the E&I equipment and package equipment. Verify equipment meet the applicable job specifications under purchase contract. ● Reviews Client's technical documentation and requirements. ● Prepare Material take of (Bill of Material) of electrical system. ● Provides technical assistance to commercial activities. ● To establish and maintain a good working relationship with the various contractors and their respective personnel. ● Issues data sheets and electric equipment specifications. ● Participate in testing and commissioning of all Electrical equipment to ensure electrical systems meet contractual specifications and requirements. ● Support and assist during commissioning activity.

Projects: ● DP2 ROV 78 m,H 865B , Remotely Operation Vessel, Nor Spring ,Ownered By NOR Offshore Pte Ltd (Finish). ● ACCOMMODATION / CRANE BARGE 300M, – AFLOAT, H053B 100m, African Worker, Owner by Marine Subsea (Finish). ● Anchor Handling Supply Vessel (AHSV 70M), H 871B, Jaya Champion, DP2, ABS Class, Owner By Gulf Marine Pte Ltd (Finish). ● Anchor Handling Supply Vessel (AHSV 70M), H 872B, Jaya Chancellor, DP2,ABS Class, Owner By Jaya Pte Ltd (Finish). ● Anchor Handling Supply Vessel (AHSV 70M), H 874B, Jaya Chieftain, DP2,ABS Class, Owner By Jaya Pte Ltd (finish). ● DP2 ROV 82 m, H 873B Nor Australia, ABS Class, Multi-Purpose Offshore Vessel, Owner By NOR Offshore Pte Ltd (Finish). ● ACCOMMODATION / CRANE BARGE 300M, – AFLOAT, H056B African WorkerLimassol, Owner by Marine Sub-Sea Pte Ltd (Finish). ● Anchor Handling Supply Vessel (AHSV 60M), H 894B, Mermaid Sapphire, DP2, ABS Class, ROV & Air Diving Support Vessel, Owner By Mermaid Offshore pte Ltd (Finish). Job description: ● Ensure that all E&I equipment are installed according to approved engineering drawings and schematics. ● Perform inspections, reviews and audits of jobsite E&I installation operations, and provide supporting documentation. ● Monitor and audit subcontractors’ E&I activities, assuring they meet their quality programs and the contract requirements. ● Supervise and check the electrical and instrument system such: Installation of Cable, Cable tray, size of cable, Lighting, Distribution control panel, all electrical equipment and Grounding system, connection of motor, starter panel of panel, termination of cable, megger test of motor and cable, continuity test of cable, check the breaking capacity of breaker with the actual condition at field. ● Routine checks of completed work, punch lists for incomplete / unfinished work, ¬ification of release inspections for equipment turn over. ● Inspection of electrical installation switchgear and MCC’s, transformers and electrical motors. ● Ensure the E&I work is done in compliance with applicable rules and standards including ABS rules, Company and Shipyard Standards. ● Ensure the E&I work is completed in compliance with project safety policies and procedures. ● Monitor and report weekly work schedules for proper level of detail to ensure expeditious progress in E&I tasks recognizing the critical path of the master schedule. ● Establish close communication and teamwork with other disciplines to ensure overall successful completion. ● Support planning and execution of pre-commissioning and commissioning work. ● Do Pre commissioning and commissioning testing for all electrical and instrument system such: safety device of generator, load test of generator, bilge alarm system, Fire alarm & system detection, Main Engine system alarm, firefighting, PA Talkback, Communication system, Thruster system, Navigation system. ● Follow and joint during Sea Trial of ship.

● Set-up quality standard for new project. ● Provide technical support to QA/QC department if any new project. ● Do corrective action if any issue quality problem from owner. ● Confirm In-process and outgoing Quality control following correct method. ● Settle daily problem and follow-up in process and outgoing reject. ● Settle owner claim. ● Follow-up Quality improvement project. ● Follow-up every Engineering Change Note. ● Perform Internal Audit. ● Action and close all customer complaints. ● Control all achieves documentation upon the completion of the project. ● Coordinate all QA/QC activities with the site QC manager. ● Monitor all quality related activities on the project. ● Monitor the disposition of all issued nonconformance reports. ● Review supplier’s inspection and test plans against the milestone scope of work. ● Resolve any discrepancies between the completed milestone and quality documentation. ● Coordinate with the commissioning department to define the scope of work.

Duties and responsibility: ● Conduct primary analysis and troubleshooting for defective parts from production or suppliers. (Verify the defect before disclosing to other parties). ● Conduct internal meeting with other concerned dept. to discuss part quality issues when necessary. ● Liaise with suppliers and factory QC to settle quality issue of parts including following up of countermeasure and its effectiveness. ● Draft Inspection Check sheets and ensure content of inspection is complied with requirements. ● Ensure job procedures and instructions are followed up by subordinates. ● Conduct supplier audit and maintain audit records. ● Maintain records of investigation and follow up action for non-conforming parts. ● Ensure measuring equipment are correctly set-up and properly verified / calibrated before used. ● Assist QA Manager in ensuring a smooth operation in QC. Authority: ● Draft Working Instruction, Checking Procedure for QC inspection. ● Draft Inspection Check Sheets for QC inspection. ● Make primary judgment for incoming parts. (To hold release of part temporary). ● To reject parts that does not meet specification.