● Marjan Increment Program Package 18 Jubail Area Pipeline.

● Hawiyah Unayzah Gas Reservior Storage (GGM/Trunkline Proj).

● Pipeline Rehabilitation Project – 2010 (Ras Tanura to Safaniyah Area).

● Sulfur Railcar Loading Facilities – Aramco Berri Gas Plant Project.

● Jizan Refinery Terminal Facilities – EPC 5 South Tank Farm Project.

● Assist in site inspection and closed monitoring the on going work to insure the equipment and materials are approved by SAUDI ARAMCO materials specification standard (SAMSS). ● Receiving inspection on CP materials like Rectifier, HSCI Anode and accessories, Terminal Junction boxes, CP cables; as per delivery notice, material data sheets, packing list, outbound, inspection release, NMR, MTC. ● Prepare, keep and maintain the reqiured documentation related to QA/QC materials delivered on site to confirm with the approved and conformance to ifc drawings and project specification with SAES. ● Inspect the point of exothermic weld to ensure that proper removing of pipe coating is applied prior to exothermic welding. ● Inspect the connection strenght by lightly tapping top of weld by one bound hammer. If weld fail and must be repeated. ● Inspect the installation of three pin test station & the correct termination of positive and negative lead wires. ● Conduct monthly galvanic CP circuit potential survey to ensure adequate protection of the pipe. ● Witness inspection of Impressed Current Cathodic Protection installation for the well casings. ● Ensure that HSCI TA-5A anode lead wires length are correct as per the CSD recommendation prior to material receiving inspection. ● Witness of holiday detection test of anode cables prior to Deep Anode Bed loading. ● Witness of Deep Anode Bed loading/installation & ensuring anode spacings are as per CSD recommendation and the anode resistance readings before and after coke breeze had been taken. ● ICCP cable laying visual inspection to ensure negative CP cables has no insulation defects prior to backfilling. ● Raising RFI to PID & PMT for all completed installation works on site according to SATIP thru QMIS. ● Review Approved project specification and strongly implement of the project as per quality plan requirements. ● Responsible for Material Receiving Inspection for Electrical materials in compliance to the project specifications and applicable standards, and check for physical damages and correct data sheets, and follow the approved procedure for storage and preservation prior to the start of material receiving activities, and refer the Specification and national standard NEC/IEC. ● Conduct daily surveillance on site and make to ensure all work/activities are executed correctly as per the project requirements. ● Responsible to attend all request for Inspection (RFI) on time issued by construction team for the acceptance or rejection of the particular scope of works as stated in the RFI description and IFC Drawing attached. ● Interfaces with the client, construction team, QC Inspectors and other construction discipline regarding on technical and quality aspect, particularly in sub-station, i.e. Electrical Equipment layout MV & LV Switchgear, LV Motor Control Center, Variable Frequency Drive, High Voltage Cable Bus 34.5/13.8/0.480KV, Base on approved IFC drawing Specification and national standard (NFPA-70,NEC-110). ● Conduct surveillance inspection & checked to the approved IFC drawing and Specification of Non Hazardous and Hazardous area and severe corrosive area which is stated in NFPA 497/499 and NEC-article 501 and SAES-B-068 as per Saudi Aramco Project requirements. ● Coordinate with the Engineering and Design Department Regarding on the technical issue such as: Site query, latest revision of design and drawings, and the necessary remedy for the closure of site quality observation, Non-conformance report and quality deficiency report. ● Witness pre-commissioning/ completion package for all Electrical equipment test results document. ● Observed, Follow and Implement Health, Safety and Environment Guidelines in the project site.

● Review on all electrical shop drawings prior to submittal for approval to client. ● Prepare Material take off. ● Coordinate manufacturer and material supplier for their document submittals to SEC. ● Monitor field construction activities to ensure the progress as per approved time schedule and design requirement in compliance with drawing, specifications and standards. ● Conduct and participate in project coordination meeting with the clients and other involved staff personnel, monitor the ongoing activities, coordinate and discuss all related problems occurs in site. ● Site design modification, drawing field changes, issuance of field engineering instruction, review and comments on material submittals, answer to technical queries and develop Red marked drawings and As Built drawings. ● Inspection and quality check-ups of delivered materials and equipments as per project drawings and specifications, Mobilization of equipments to site and proper installation of all equipments such as Switchgears, Power Transformers, GIS equipments, Control and Relay Panels, Capacitor Bank, Generators, Station Service Transformer, Batteries Bank and Chargers, Cable ladders and trays.

● Punchlist clearing for the remaining construction punchlist and sytem punchlist. ● Conduct solo run test for pumps and motors. ● Conduct illumination testing for emergency and normal lightings. ● Solving Problems regarding Electrical Installations issues in Field sides that conflicting the Installations of other discipline.

● Installation of Perforated and Ladder rack tray in Pumps, Vessels, Pipe rack, Structures, Boilers, Furnaces, Storage Tanks, Control Buildings, RIB Buildings, and Substations. ● Installation of Lightings in Pumps, Vessels, Pipe rack, Structures, Boilers, Furnaces, Storage Tanks, Control Buildings, RIB Buildings, and Substations. ● Installation of Groundings in Pumps, Vessels, Pipe rack, Structures, Billers, Furnaces, Storage Tanks, Control Buildings, RIB Buildings, and Substations. ● Heat Tracing Installations for pipelines, vessels, bins and tanks. ● Cathodic Protection Installations for under grade pipelines. ● Cable Laying installations in duct bank an electrical trenches. ● Cable pulling of power cables from substation going to motors and pumps. ● Punchlist clearing for the remaining construction punchlist and sytem punchlist. ● Conduct solo run test for pumps and motors. ● Conduct illumination testing for emergency and normal lightings. ● Solving Problems regarding Electrical Installations issues in Field sides that conflicting the Installations of other discipline. ● Make/initiate Site Instruction if there is modification needed in Installations in Field side. ● Coordinates with Sub-con Supervisor/Superintendents in regards with works progress in the Site. ● Monitor Installations if it is installed base on a SABIC Standards and Specifications. ● Ensure that the work by Sub-contractors under their control is undertaken in the way that addresses and eliminates hazards and ensure that risk analysis, hazardous substance/material assessments and work method statement where required, are in place. ● Carry out daily review of permits and their compliance.

● Installation of 11 KV distributions, Transformer 100KVA, 200KVA, 250KVA/220V/60HZ. Low voltage power distribution, lighting, fire alarm system and lightning protection. ● Cable Laying Installation up to 500mm2 XLPE armored and unarmored power cable. ● Cable tray Installation with width sizes from 100 mm – 1000 mm ladder type (2.4m to 3.7m length. ● PVC, GI conduits installation sizes from 25mm to 150mm. Exposed and Embedded installation. ● Power Panel boards 2500A/ 4 wires 3 phase 480V AC, 60 HZ and Main Distribution Panel Installation. ● Installation of electrical equipment such as HVSG 13.8KV 630A rating, power transformer 5MVA, 13.8KV /6.6 KV, 3 phase, 3 W, D-Y connected and power cables rating 13.8KV with sizes from up to 630mm, armored, unarmored XLPE. ● Grounding system for installation of substation electrical equipments, MDP Panels, Power House control panel, LV panel and other electrical equipments. ● Installation of lighting (Industrial Type, High Bay, Louver Type, Perimeter lighting, and Flood Lighting) for Industrial Utilities. ● Conducting Ground Earth Insulation, conductor megger, power transformer, and fire alarm system testing and commissioning. ● Installation of motor control panel for Exhaust/Ventilation/Suction Fans for HVAC System. ● Installation of motors and their allied control accessories such as MCB, MCCB, ACB, Disconnections/Isolators. ● Erection of 250 KVA/480 KVA, 3 Phase, 60 cycles, 4 wire diesel generators as standby power source and their control switch gears such as MCB. ● Erection of change over controls for the stand by power and main power from government grid. ● Indenting for procurement of electrical materials like switches, motors, breakers, cables and wires and auxiliary spares. ● Modification and erection of electrical equipments such as motors from fractional horse power to 300HP/440V/60HZ. ● Modification of existing drawing for up grading to the construction and obtaining clients approval. ● Preparation of update drawing as per site condition and submitting to the clients for pre commissioning. ● Attending pre-commissioning and rectification. ● Enforcing to follow up the safety orientation in the site then and there. ● Installation of field devices such as limit switches, level switches, photo sensor. ● Prepare rehabilitation update reports and submit to Project Manager. ● Conduct servicing and integrity check of fire alarm system. ● Laying power and control cables (Low and Medium voltage) both in underground and in the air (cable tray) low voltage rating 220 - 480V / medium voltage rating 13.8 – 34.5KV. ● Conduct and evaluate the materials as per final acceptance of the arrived materials as per required specification. ● Abides the safety rules and regulation of a construction project.

● Designing power distribution in the urban areas. ● Solving low voltage occurrence in the affected areas. ● Making proposal how to lessen the voltage drop occurred in affected areas. ● Making site survey for low voltage calculation. ● Analyzed the power distribution system in the areas.